Ultra-Short Pulsed Laser Deposition of Oxides, Borides and Carbides of Transition Elements

Oxides, borides and carbides of the transition elements are materials of great interest from a technologic point of view. Many of these materials are used in the form of thin films, so several techniques are commonly used to deposit them. Among these techniques, Pulsed Laser Deposition (PLD) performed using ultra-short pulse lasers, mainly fs lasers, presents unique characteristics in respect to PLD performed using conventional short pulse lasers. Indeed, the films deposited using fs PLD are often nanostructured, and this technique often allows the target stoichiometry to be transferred to the films. In this work, we will review the use of ultra-short PLD in the production of films obtained from transition metal oxides, borides and carbides, evidencing the advantages offered by this technique, together with the problems arising with some of the studied systems. We conclude that even if ultra-short PLD is surely one of the most important and useful deposition techniques, it also presents limits that cannot be ignored

Laser Irradiation of a Bio-Waste Derived Carbon Unlocks Performance Enhancement in Secondary Lithium Batteries

Pyrolyzed carbons from bio-waste sources are renewable nanomaterials for sustainable negative electrodes in Li- and Na-ion batteries. Here, carbon derived from a hazelnut shell has been obtained by hydrothermal processing of the bio-waste followed by thermal treatments and laser irradiation in liquid. A non-focused nanosecond pulsed laser source has been used to irradiate pyrolyzed carbon particles suspended in acetonitrile to modify the surface and morphology. Morphological, structural, and compositional changes have been investigated by microscopy, spectroscopy, and diffraction to compare the materials properties after thermal treatments as well as before and after the irradiation. Laser irradiation in acetonitrile induces remarkable alteration in the nanomorphology, increase in the surface area and nitrogen enrichment of the carbon surfaces. These materials alterations are beneficial for the electrochemical performance in lithium half cells as proved by galvanostatic cycling at room temperature

Preparation of the group III nitride thin films AlN, GaN, InN by direct and reactive pulsed laser ablation

The methods of preparation of the group III nitrides AlN, GaN, and InN by laser ablation (i.e. laser sputtering), is here reviewed including studies on their properties. The technique, concerns direct ablation of nitride solid targets by laser to produce a plume which is collected on a substrate. Alternatively nitride deposition is obtained as a result of laser ablation of the metal and subsequent reaction in anNH3atmosphere. Optical multichannel emission spectroscopic analysis, and time of flight (TOF) mass spectrometry have been applied forin situidentification of deposition precursors in the plume moving from the target. Epitaxial AlN, GaN, and InN thin films on various substrates have been grown. X-ray diffraction, scanning electron microscopy, have been used to characterise thin films deposited by these methods

Removal of diclofenac from aqueous solutions by adsorption on thermo‑plasma expanded graphite

The adsorption of diclofenac on thermo-plasma expanded graphite (a commercial product) from water solutions was investigated. The adsorbent material was characterized by SEM, TEM, BET, Raman and X-ray diffraction analyses. Typical diffractogram and Raman spectrum of graphitic material, dimension of 24.02 nm as crystallite dimension and a surface area of 47 m2 g−1 were obtained. The effect of pH on the adsorption capacity was evaluated in the range 1–7 and the adsorption mechanism was described by kinetic and isothermal studies. Pseudo-second order and Dubinin–Radushkevich models agreed with theoretical values of adsorption capacity (i.e. 400 and 433 mg g−1, respectively) and resulted to be the best fit for kinetics and isothermal experimental data. The thermodynamics of the process was evaluated by plotting the adsorption capacity/concentration ratio at the equilibrium as a function of different values of the multiplicative inverse of temperature. Moreover, the adsorbent regeneration was also investigated, comparing two different remediation techniques. Solvent washing performed with NaOH 0.2 M and thermo-treatment carried out by heating in an oven at 105 °C for 2 h and then at 200 °C for 4 h. The thermo-treatment was the best technique to regenerate the adsorbent, ensuring same performance after 4 cycles of use and regeneration

Mn-Doped Glass–Ceramic Bioactive (Mn-BG) Thin Film to Selectively Enhance the Bioactivity of Electrospun Fibrous Polymeric Scaffolds

In recent years, significant progress has been made in the development of new technologies to meet the demand for engineered interfaces with appropriate properties for osteochondral unit repair and regeneration. In this context, we combined two methodologies that have emerged as powerful approaches for tissue engineering application: electrospinning to fabricate a nanofibrous polymeric scaffold and pulsed laser deposition to tune and control the composition and morphology of the scaffold surface. A multi-component scaffold composed of synthetic and natural polymers was proposed to combine the biocompatibility and suitable mechanical properties of poly(D,L-lactic acid) with the hydrophilicity and cellular affinity of gelatin. As part of a biomimetic strategy for the generation of bi-functional scaffolds, we coated the electrospun fibers with a thin film of a bioactive glass–ceramic material supplemented with manganese ions. The physico-chemical properties and composition of the bi-layered scaffold were investigated, and its bioactivity, in terms of induced mineralization, was tested by incubation in a simulated body fluid buffer. The processes of the inorganic film dissolution and the calcium phosphate phases growth were followed by microscopic and spectroscopic techniques, confirming that a combination of bioactive glass–ceramics and nanofibrous scaffolds has promising potential in the regeneration of osteochondral tissue due to its ability to induce mineralization in connective tissues. © 2022 by the authors

LIPSS Applied to Wide Bandgap Semiconductors and Dielectrics: Assessment and Future Perspectives

With the aim of presenting the processes governing the Laser-Induced Periodic Surface Structures (LIPSS), its main theoretical models have been reported. More emphasis is given to those suitable for clarifying the experimental structures observed on the surface of wide bandgap semiconductors (WBS) and dielectric materials. The role played by radiation surface electromagnetic waves as well as Surface Plasmon Polaritons in determining both Low and High Spatial Frequency LIPSS is briefly discussed, together with some experimental evidence. Non-conventional techniques for LIPSS formation are concisely introduced to point out the high technical possibility of enhancing the homogeneity of surface structures as well as tuning the electronic properties driven by point defects induced in WBS. Among these, double- or multiple-fs-pulse irradiations are shown to be suitable for providing further insight into the LIPSS process together with fine control on the formed surface structures. Modifications occurring by LIPSS on surfaces of WBS and dielectrics display high potentialities for their cross-cutting technological features and wide applications in which the main surface and electronic properties can be engineered. By these assessments, the employment of such nanostructured materials in innovative devices could be envisaged

Nanoparticle Thin Films for Gas Sensors Prepared by Matrix Assisted Pulsed Laser Evaporation

The matrix assisted pulsed laser evaporation (MAPLE) technique has been used for the deposition of metal dioxide (TiO2, SnO2) nanoparticle thin films for gas sensor applications. For this purpose, colloidal metal dioxide nanoparticles were diluted in volatile solvents, the solution was frozen at the liquid nitrogen temperature and irradiated with a pulsed excimer laser. The dioxide nanoparticles were deposited on Si and Al2O3 substrates. A rather uniform distribution of TiO2 nanoparticles with an average size of about 10 nm and of SnO2 nanoparticles with an average size of about 3 nm was obtained, as demonstrated by high resolution scanning electron microscopy (SEM-FEG) inspections. Gas-sensing devices based on the resistive transduction mechanism were fabricated by depositing the nanoparticle thin films onto suitable rough alumina substrates equipped with interdigitated electrical contacts and heating elements. Electrical characterization measurements were carried out in controlled environment. The results of the gas-sensing tests towards low concentrations of ethanol and acetone vapors are reported. Typical gas sensor parameters (gas responses, response/recovery time, sensitivity, and low detection limit) towards ethanol and acetone are presented